Stitching Hull and Deck Complete

 By the end of April, stitching the hull was complete. 

Then it was the deck. The deck has been laid on top of hull just to check on they are lining up.

If you look closely, you can see the stern has a bit of a twist from bottom to top. And the deck does not align at the end with the hull. This is before stitching the two together. And that won't happen until the panel seams are epoxied and bulkheads are restitched back in.

I also used doweling wrapped with electricians tape at both sides of the bow and stern as suggested in the manual to the panels aligned where the curvature was greater. This worked well.